PREPARE : All surfaces should be clean and free from dust, grease and oil. Make sure surface is dried completely. Protect/mask surrounding areas from overspray. When using indoors, ensure area of application is well ventilated.  Shake can well for at least 2 minutes. Test spray on a disposable object before applying to your project (propellent will dispense with initial spray).  

APPLY : Apply between 10°C-35°C. Do not use for gaps larger than 3mm. Spray 25cm from surface, covering evenly. Multiple coats can be applied to ensure all cracks have been filled. Allow 10-15 minutes between coats. Touch dry in less than one hour. Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Porous materials may require additional coats. Full cure in 24 hours. Product will cure with a matte finish.  

STORAGE : After completing the project, turn the can upside down and spray a short jet of clear gas away from the body. Wipe nozzle with a dry cloth and clear with isopropyl alcohol according to solvent manufacturer’s instructions. Store upright in a cool, dry place away from children and animals.