PREPARE: All surfaces should be clean and free of dirt, grease, oil and old adhesive. Cut off the seal at the top of the cartridge above the screw thread. Screw on nozzle and remove cap. Cut nozzle to desired bead size using guides on nozzle for reference. Insert cartridge into cartridge gun.

APPLY: Squeeze adhesive on to one surface in a zig-zag pattern. When working on rough, uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5°C.

PRESS: Within 10 minutes of application, press surfaces firmly together and hold for 20-60 seconds. Full cure achieved in 24 hours. Note: Heavy items may require temporary support and mechanical fastening.

STORAGE: Do not remove nozzle. Remove excess adhesive from nozzle surface with a dry cloth. Replace cap tightly to prevent adhesive from curing. Store in a cool, dry place. To re-use product, unscrew nozzle and clean out cured adhesive.